Find a project relevant to your site
Browse examples by product or type of work. From an entrance-door repair to new industrial doors or a gate upgrade, each project explains the requirement, the work completed and the finished result.
Most recent projects first.
A new sectional overhead door installed at an industrial property in the East Riding of Yorkshire.
A same-day roller shutter repair completed at an industrial property in Baildon after the door had been struck by a forklift.
Another industrial sectional door installation completed by the Sentry Automation team.
A recent industrial door replacement completed by the Sentry Automation team in Chesterfield.
Another automatic sliding gate fault diagnosed and repaired by the Sentry Automation team, this time at a commercial site in Sheffield.
A new 3-phase insulated roller shutter door supplied and installed by Sentry Automation at an industrial property in West Yorkshire.
Another 3-phase industrial sectional door installation completed by Sentry Automation at a food storage and distribution facility in South Yorkshire.
Sentry Automation supplied and installed a three-phase industrial roller shutter at a property in West Yorkshire.
A recent traffic barrier and ANPR access control job completed by Sentry Automation at an industrial site in North Yorkshire.
A grey three-phase sectional overhead door was supplied and installed at an industrial property in South Yorkshire.
Another roller shutter installation completed by Sentry Automation, this time at an agricultural property in North Yorkshire.
Sentry Automation supplied and installed a new three-phase sectional overhead door at an industrial property in South Yorkshire.
A recent automatic gate repair and service completed for an industrial customer in Bradford, West Yorkshire.
Another new-build commercial project completed by Sentry Automation in Heckmondwike, West Yorkshire.
This time supporting with a sliding security grille at Joe & The Juice in the Terminal 2 Departure Lounge.
A warehouse sectional door at a hot tub distribution centre in Chesterfield was badly damaged and stuck closed, disrupting deliveries.
A massive improvement on this one, replacing five tired red steel doors with new door sets finished in a striking blue.
A haulage, storage and distribution site in Goole reported an intermittent fault with its automated vehicle gate.
A commercial roller shutter in Normanton was struck by a forklift and then operated while damaged, causing the curtain to jam over the top of the opening.
We were called out to a commercial property with an aluminium entrance door that had seen better days and was no longer operating as it should.
Two steel doors at a site in Morley, Leeds had deteriorated and no longer opened properly.
A roller shutter replacement formed part of an ongoing gym refurbishment in Rotherham.
Four damaged lower panels needed replacing on the branded sectional door at Leeds Wrap Co in Holbeck.
Four roller shutters were installed at a new-build commercial unit in Thirsk, North Yorkshire.
An automatic bi-parting sliding entrance at Airedale Shopping Centre in Keighley had gone out of service following a snapped drive belt.
Two insulated roller shutters were supplied and installed at a new-build commercial unit in Queensbury, West Yorkshire.
A warehouse sectional door in Harrogate was stuck open and the building could not be secured. A lifting cable had come off its drum and activated the spring break device.
The automated entrance gates at a holiday cottage business in Sleaford had an unresponsive GSM access system and stuttered during opening.
Following an initial survey, remedial works were completed on three roller shutters in Stanningley, Pudsey.
A forklift impact had left a Castleford warehouse sectional door stuck open, with the pulley wheels displaced from the J tracks on both sides.
A pharmacy distribution centre in Middlesbrough could not secure its roller shutter at the end of a shift.
An industrial sliding gate in Sheffield was stopping part-way through its closing cycle.
A failed roller shutter motor needed replacing during an ongoing refurbishment in Bingley, West Yorkshire.
Two roller shutters were installed at a new unit in Oakworth, Keighley.
Three steel doors with external push-button code locks were installed at a site in Walsall.
The roller shutter over a building’s main entrance in Bradford had stopped working.
A damaged safety edge had left an automated sliding gate stuck open at a storage facility in Baildon.
A three-phase roller shutter in Nelson, Lancashire required an overhaul of its barrel assembly and operating components.
A failed roller shutter at a 24-hour casino in Doncaster had bunched into the ceiling area and become unusable.
Three high-speed doors were installed at a Warburtons food production site in Newcastle upon Tyne.
Two existing steel doors were replaced at a site in Dukinfield, Greater Manchester.
An unreliable entrance sliding gate in Horsforth underwent re-automation and an overhaul.
A tyre fitting garage in Sowerby Bridge reported a roller shutter that would no longer lift over the bank holiday period.
Sentry Automation attended a jeweller in York city centre over the bank holiday after its roller shutter stopped operating correctly.
A roller shutter at a Pontefract bingo hall and social club was stuck open during the bank holiday weekend.
A fire-rated shutter was supplied and installed at Manchester Airport.
A forklift impact had severely damaged a sectional door at an industrial site in Sheffield, folding multiple panels and compromising the running gear.
A worn chain-operated loading bay shutter in Keighley was replaced with a black three-phase electric roller shutter.
An existing timber personnel door at a commercial property in Driffield did not properly suit the opening and left the cavity exposed above.
An unreliable audio-only intercom was replaced at a commercial access point in Barnsley.
A busy car garage in Harrogate required replacement of a roller shutter with a bent barrel, alignment problems and no safety brake.
A new traffic barrier was installed at a site in Stourton to manage vehicle access.
Three sectional doors were supplied and installed at a new-build industrial site in Garforth.
A flooded control panel had left a commercial property’s automated gate in Horsforth out of operation.
An older Henderson insulated sectional door at a vehicle repair garage in Richmond had failed following a broken main spring.
Sentry Automation completed a programme of high-speed fabric door installations across sites in Newcastle, Bolton and Leeds.
An existing traffic barrier in Warrington required a replacement boom and associated upgrades.
A programme of roller shutter installations was completed across several industrial and commercial sites.
Planning similar work?
If a project looks relevant to your building, send us the location, photographs or drawings and a brief description of what you need. We can discuss a replacement, new installation, supply-only order or ongoing maintenance.
Looking for product details?
Visit Find a Product & Downloads to compare available ranges and view the relevant Sentry brochures and technical PDFs.
